斧のクリーニング→表面加工→研ぎが終わったので、柄入れ、そしてシース作りです。斧の表面加工は、アマニ油を焼き付けて錆止め。柄の固定にはゴリラグルーとオークの楔。
I have finished the cleaning, surface finish and sharpening of the axe head, so the setting of helve and sheath making has started. For the surface finish, I have heat set the coat of linseed oil. For helve, I have used the Gorilla glue and oak wedge.
I have finished the cleaning, surface finish and sharpening of the axe head, so the setting of helve and sheath making has started. For the surface finish, I have heat set the coat of linseed oil. For helve, I have used the Gorilla glue and oak wedge.
接着剤がほぼ硬化したところで、シース作り。
Once the glue is hardened, started the sheath making.
Once the glue is hardened, started the sheath making.
↓↓↓↓↓↓↓↓
↓↓↓↓↓↓↓↓
革がある程度乾いたら、レザーオイルを染み込ませ、磨いて完成！試し切りが待ちどうしい！！
Once the sheath gets dry enough, I will apply oil and give a shine! Can’t wait for test cut!!
Once the sheath gets dry enough, I will apply oil and give a shine! Can’t wait for test cut!!
VERY nice sheath!
ReplyDeleteThank you Gorges for your comment and checking my blog!
ReplyDeleteStill need little more work on this sheath, but is actually turning out to be better than I expected. So I am quite happy with it so far.